Roofing Elmaton homes the way we have since 2002 — measured on site, priced in writing, and finished the way we would want our own roof finished.
Pick a service to see how we handle it and what the job usually looks like on a Elmaton roof.
One leak usually has company. We fix the one you called about and check over the rest of the roof while we are already up there.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
We match the guard to your trees and your gutter profile, and make sure water can still get in where it is supposed to.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
Standing seam and metal panel roofs, measured and cut on site. We help you settle on a color, set the panels straight, and trim the ridge and valleys so the whole roof sheds water the way it should.
Ice backs up at a cold eave and pushes water sideways under the roof. We clear it without gouging the panels or the shingles.
We repair standing seam, exposed fastener panels and metal shingles, and we match the color as closely as the paint system will allow.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Careful footwork, matched materials, and flashing done the way it was done when the roof went on.
Hail bruises shingles and dents the softer metal on vents, valleys and gutters. We show you what we find and document it properly for the claim.
Old skylights leak at the flashing long before the glass ever fails. We reflash, reseal, or set a new unit and tie it in properly.
If wind got under your roof once it will try again. We fix the damage and close the edge back up so there is nothing left to catch.
Buying, selling, or just want to know how many years you have left? We look, we tell you, and we do not turn it into a pitch for a roof you do not need.
Full tear off, decking checked board by board, then a new metal or shingle roof over proper underlayment. You get the price and the start date before anything comes off.
Storm damage does not wait for business hours. We get the opening closed, photograph it for your insurance, and put the real fix on the schedule.
We still shingle plenty of roofs. Cracked, curled and blown off shingles get replaced, and the valleys and flashing get reworked while we are up there.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
Most roofs somebody has called a lost cause are not one. We repair what can be repaired, and we tell you honestly when a repair will no longer hold.
Rotted fascia and sagging soffit let water and animals in behind the roof edge. We cut the bad wood out and put new in.
Roofing Brothers began in 2002 as a family roofing company in Morganton, North Carolina, and it is still run the way it started. Homeowners in Elmaton reach that same outfit — the one that has been setting metal panels and laying shingles for over twenty years — through our network of local crews.
In a city the size of Elmaton, word travels fast about who does good work and who does not. That suits us fine. We would rather put one roof on right and have the neighbors ask about it than chase volume all over Texas.
Nothing fancy — free estimates, honest answers, and roofs that go on straight.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
A few backed out screws or a whole roof off a church — we take both. No job is too small to get the same crew and the same care.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Common questions from Elmaton, TX homeowners about metal roofs, repairs and what a roof costs.
A typical Elmaton shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
Any dry stretch works. We roof in Elmaton year round, though we schedule shingle work for when it is warm enough for the strips to seal properly, and we watch the forecast so your house is never left open overnight.
Sometimes. If the decking is sound and there is only one layer of shingles, a Elmaton metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
That is most of what leak work is. Water runs along decking and rafters before it ever drips, so the stain on your Elmaton ceiling is rarely under the actual hole. We work back to the real entry point, fix that, and check the rest of the roof while we are up there.
Much less than people expect. Over solid decking with underlayment under it, a Elmaton metal roof sounds about like a shingle roof from inside the house. The loud tin roof people remember was screwed straight to open purlins over a barn with nothing underneath.
Often, yes. Plenty of the Elmaton roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
What people say once the crew has packed up and gone home.
"Cannot say enough about how careful they were around the flower beds. Everything got covered and nothing was trampled."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Roofing Brothers do excellent work. They've completed several projects for me and every time the quality has been top notch. They're reliable and take pride in what they do. I highly recommend them!"
Looking for a roofer just outside Elmaton? These areas are covered too.